Author Index

A

  • Abolfathi, Saman An experimental study on drag coefficient of a cam-shaped tube with different aspect ratios [Volume 21, Issue 2, 2019, Pages 75-91]
  • Aghaziarati, Zeinab Feasibility and exergoeconomic analysis of a cogeneration system for a hospital based on the solar organic Rankine cycle in Iran [Volume 21, Issue 4, 2020, Pages 197-219]
  • Alemohammad, Seyed Hamidr Reza Optimal design and operation of a CCHP system from an economic perspective For a residential campus located in Ahvaz [Volume 21, Issue 2, 2019, Pages 114-132]
  • Alemohammad, Seyed Mohammad Javad Optimal design and operation of a CCHP system from an economic perspective For a residential campus located in Ahvaz [Volume 21, Issue 2, 2019, Pages 114-132]
  • Aliabadi, Mohammad The effect of materials on energy consumption, carbon production and thermal comfort in office building in hot and humid, hot and dry and cold, Iran [Volume 21, Issue 4, 2020, Pages 33-6]
  • Amanifard, Nima Numerical analysis of flow field and heat transfer affected by Electrohydrodynamic actuator using micropolar model [Volume 21, Issue 2, 2019, Pages 133-154]
  • Ameri, Mohammad Numerical investigation of heat transfer and power generation of combined thermoelectric generators and Photovoltaic-Thermoelectric hybrid system embedded in the solar cavity [Volume 21, Issue 2, 2019, Pages 29-55]
  • Aminfar, Habib Heat Transfer Optimization for Straight and Helical Double Layer Micro-Channel Heat Sink [Volume 21, Issue 2, 2019, Pages 6-28]
  • Amin Yazdi, Seyed mohamad ali Aeroelastic instability of symmetric laminated beam-plates with two delaminations ‎ [Volume 21, Issue 3, 2019, Pages 181-196]
  • Arab maleki, vahid An analytical method for dynamic analysis of fluid conveying viscoelastic pipes b [Volume 21, Issue 1, 2019, Pages 6-29]
  • Arefnezhad, Sadegh Design and Implementation of an Intelligent Collision Avoidance System based on Delay of Driver-Vehicle Unit [Volume 21, Issue 1, 2019, Pages 54-71]
  • Armaghani, Taher Natural convection heat transfer of nanofluid in an enclosure saturated with square and circular blocks [Volume 21, Issue 4, 2020, Pages 174-196]
  • Arvin Boroujeni, Hadi Nonlinear forced vibration of clamped-free beam reinforced by carbon nanotubes with an attached mass [Volume 21, Issue 3, 2019, Pages 158-180]
  • Asgari, Hosein Hydro-static effect on free vibration of circular plate in contact with bounded fluid on elastic foundation [Volume 21, Issue 1, 2019, Pages 132-150]
  • Ashtian Malayer, Mahdi Numerical Investigation of Heat Transfer in Serpentine Microchannel with Al2O3/Water and CuO/Water Nanofluids [Volume 21, Issue 2, 2019, Pages 56-74]
  • Ayatollahi, Majid Reza Calculation of asymptotic stress field, Stress intensity factors and higher order terms in key-hole notches [Volume 21, Issue 3, 2019, Pages 225-243]
  • Azarakhsh, Sajad Experimental and Numerical Investigation of Energy Absorption in Thin-Walled Bi-tubular Conical Tubes under Axial Load [Volume 21, Issue 3, 2019, Pages 138-157]

B

  • Baghani, Mostafa Bending analysis of pH-sensitive hydrogels with functionally graded properties [Volume 21, Issue 1, 2019, Pages 116-131]
  • Baghani, Mostafa Study of rutting effect on the mechanical behavior of asphalt pavement under moving loads [Volume 21, Issue 3, 2019, Pages 27-52]
  • Bagheri, Saeed Numerical Investigation of Heat Transfer in Serpentine Microchannel with Al2O3/Water and CuO/Water Nanofluids [Volume 21, Issue 2, 2019, Pages 56-74]
  • Bahrami, Bahador Calculation of asymptotic stress field, Stress intensity factors and higher order terms in key-hole notches [Volume 21, Issue 3, 2019, Pages 225-243]
  • Bahrami, Maryam Estimation of fouling profile in boiler tubes using inverse heat transfer method, laminar flow [Volume 21, Issue 4, 2020, Pages 83-106]

C

  • Chahartaghi, Mahmood Modeling and simulation of an ammonia-water absorption refrigeration system with investigation of the low pressure effects on system performance [Volume 21, Issue 2, 2019, Pages 178-199]
  • Chahartaghi, Mahmood Experimental Study of Small Scale Drip Irrigation Using Positive Displacement Solar Pump in Direct Coupling Conditions [Volume 21, Issue 4, 2020, Pages 220-238]
  • Chitsaz, Ata Exergy and environmental analysis of a power and heat co-generation system fed by rice husk [Volume 21, Issue 4, 2020, Pages 59-82]

D

  • Deylami, Hamed Numerical analysis of flow field and heat transfer affected by Electrohydrodynamic actuator using micropolar model [Volume 21, Issue 2, 2019, Pages 133-154]

E

  • Eghbalpoor, Roozbeh Study of rutting effect on the mechanical behavior of asphalt pavement under moving loads [Volume 21, Issue 3, 2019, Pages 27-52]
  • Esmaeili, Hamidreza Nonlinear forced vibration of clamped-free beam reinforced by carbon nanotubes with an attached mass [Volume 21, Issue 3, 2019, Pages 158-180]

F

  • Farhangian Marandi, omid Numerical investigation of heat transfer and power generation of combined thermoelectric generators and Photovoltaic-Thermoelectric hybrid system embedded in the solar cavity [Volume 21, Issue 2, 2019, Pages 29-55]

G

  • Ghaedi, Esmael Natural convection heat transfer of nanofluid in an enclosure saturated with square and circular blocks [Volume 21, Issue 4, 2020, Pages 174-196]
  • Ghaffari, Ali Design and Implementation of an Intelligent Collision Avoidance System based on Delay of Driver-Vehicle Unit [Volume 21, Issue 1, 2019, Pages 54-71]
  • Ghaffari, Ali fuzzy model reference learning control for underactuated segway robot [Volume 21, Issue 3, 2019, Pages 5-26]
  • Golestanian, Hossein Investigating the effects of length, diameter and chirality on the mechanical properties of defective carbon nanotubes [Volume 21, Issue 1, 2019, Pages 188-217]
  • Goudarzi, Koorosh Estimation of fouling profile in boiler tubes using inverse heat transfer method, laminar flow [Volume 21, Issue 4, 2020, Pages 83-106]

H

  • Hajizadeh Aghdam, Abolfazl Feasibility and exergoeconomic analysis of a cogeneration system for a hospital based on the solar organic Rankine cycle in Iran [Volume 21, Issue 4, 2020, Pages 197-219]
  • Hedayatpour, Mehdi Experimental Study of Small Scale Drip Irrigation Using Positive Displacement Solar Pump in Direct Coupling Conditions [Volume 21, Issue 4, 2020, Pages 220-238]

J

  • Jafaizaveh, Mohammad Numerical study of the performance of energy recovery ventilation systems with a new membrane shape coupled with heat and mass transfer [Volume 21, Issue 2, 2019, Pages 200-224]
  • Jafari, Aliasghar Hydro-elastic vibration analysis of functionally graded circular plate vertically in contact with stationary fluid [Volume 21, Issue 1, 2019, Pages 72-96]
  • Jafarian, Naghme Investigation the Failures of Journal Bearing by FMEA [Volume 21, Issue 1, 2019, Pages 30-53]

K

  • Khaleghi, Ali Numerical study of the performance of energy recovery ventilation systems with a new membrane shape coupled with heat and mass transfer [Volume 21, Issue 2, 2019, Pages 200-224]
  • Khalilarya, Shahram Exergy and environmental analysis of a power and heat co-generation system fed by rice husk [Volume 21, Issue 4, 2020, Pages 59-82]
  • Khodayari, Alireza Design and Implementation of an Intelligent Collision Avoidance System based on Delay of Driver-Vehicle Unit [Volume 21, Issue 1, 2019, Pages 54-71]
  • Kiani, Abolfazl Numerical Simulation of Body-Fluid-Structure Interactions For a Flexible Stabilizer Attached to Free Flying Object [Volume 21, Issue 2, 2019, Pages 155-177]

M

  • Maghsoodpour, Adel Design and Implementation of an Intelligent Collision Avoidance System based on Delay of Driver-Vehicle Unit [Volume 21, Issue 1, 2019, Pages 54-71]
  • Mamandi, Ahmad An investigation on effect of surface stress in buckling stability of a nanotube using modified nonlocal theory of elasticity [Volume 21, Issue 3, 2019, Pages 197-224]
  • Matloobi, Mostafa Investigation the Failures of Journal Bearing by FMEA [Volume 21, Issue 1, 2019, Pages 30-53]
  • Mazidi, Mohsen Numerical Investigation of Heat and Fluid Flow in an Open Square Cavity with Nanofluids Newtonian & non Newtonian [Volume 21, Issue 4, 2020, Pages 149-173]
  • Mirabolah Lavasani, Arash An experimental study on drag coefficient of a cam-shaped tube with different aspect ratios [Volume 21, Issue 2, 2019, Pages 75-91]
  • Mirzaie, A.M. Calculation of asymptotic stress field, Stress intensity factors and higher order terms in key-hole notches [Volume 21, Issue 3, 2019, Pages 225-243]
  • Moayedi, Hesam Numerical analysis of flow field and heat transfer affected by Electrohydrodynamic actuator using micropolar model [Volume 21, Issue 2, 2019, Pages 133-154]
  • Mobarhan, Marzieh An investigation on effect of surface stress in buckling stability of a nanotube using modified nonlocal theory of elasticity [Volume 21, Issue 3, 2019, Pages 197-224]
  • Mohammadi Amin, Meysam Numerical Simulation of Body-Fluid-Structure Interactions For a Flexible Stabilizer Attached to Free Flying Object [Volume 21, Issue 2, 2019, Pages 155-177]
  • Mohammadi Hooyeh, Hadi Buckling analysis of double – bonded micro beam based on Reddy – Levinson model using differential quadrature method [Volume 21, Issue 3, 2019, Pages 53-78]
  • Mohammadzadeh, Alireza Hydro-elastic vibration analysis of functionally graded circular plate vertically in contact with stationary fluid [Volume 21, Issue 1, 2019, Pages 72-96]
  • Mohyeddin, Ali An investigation on effect of surface stress in buckling stability of a nanotube using modified nonlocal theory of elasticity [Volume 21, Issue 3, 2019, Pages 197-224]
  • Mojaver, Parisa Exergy and environmental analysis of a power and heat co-generation system fed by rice husk [Volume 21, Issue 4, 2020, Pages 59-82]
  • Moosaei, Amin Estimation of fouling profile in boiler tubes using inverse heat transfer method, laminar flow [Volume 21, Issue 4, 2020, Pages 83-106]
  • Moradi, Faraz Modeling and simulation of an ammonia-water absorption refrigeration system with investigation of the low pressure effects on system performance [Volume 21, Issue 2, 2019, Pages 178-199]
  • Mousavi, Seyed Bagher Aeroelastic instability of symmetric laminated beam-plates with two delaminations ‎ [Volume 21, Issue 3, 2019, Pages 181-196]

N

  • Najafi, mohammad Hydro-static effect on free vibration of circular plate in contact with bounded fluid on elastic foundation [Volume 21, Issue 1, 2019, Pages 132-150]
  • Narimanfar, Hamid Predictive Controller Design for Automobile Climate System [Volume 21, Issue 1, 2019, Pages 151-175]
  • Negahi, Amir Hossein Numerical Investigation of Heat Transfer in Serpentine Microchannel with Al2O3/Water and CuO/Water Nanofluids [Volume 21, Issue 2, 2019, Pages 56-74]
  • Nemati, M. Application of Lattice Boltzmann Method for Simulation of Natural Convection Nanofluid Flow inside a Parallelogram Shaped Cavity with Two Triangular Obstacles in the Presence of Magnetic Field [Volume 21, Issue 2, 2019, Pages 92-113]

O

  • Oloomi, Seid Amir Abbas Numerical Investigation of Heat Transfer in Serpentine Microchannel with Al2O3/Water and CuO/Water Nanofluids [Volume 21, Issue 2, 2019, Pages 56-74]
  • Oloomi, Seid Amir Abbas Numerical Investigation of Heat and Fluid Flow in an Open Square Cavity with Nanofluids Newtonian & non Newtonian [Volume 21, Issue 4, 2020, Pages 149-173]

P

  • Pourrajabian, Abolfazl Effect of blade section profile on the starting time of a micro-wind turbine [Volume 21, Issue 4, 2020, Pages 130-148]

R

  • Rahi, Abbas Experimental and Numerical Investigation of Energy Absorption in Thin-Walled Bi-tubular Conical Tubes under Axial Load [Volume 21, Issue 3, 2019, Pages 138-157]
  • Rahmanpour, Morteza Effect of blade section profile on the starting time of a micro-wind turbine [Volume 21, Issue 4, 2020, Pages 130-148]
  • Rastad, Sajad Numerical Investigation of Heat Transfer in Serpentine Microchannel with Al2O3/Water and CuO/Water Nanofluids [Volume 21, Issue 2, 2019, Pages 56-74]
  • Rezaee, Mousa An analytical method for dynamic analysis of fluid conveying viscoelastic pipes b [Volume 21, Issue 1, 2019, Pages 6-29]
  • Rezakazemi, Mashallah Numerical study of the performance of energy recovery ventilation systems with a new membrane shape coupled with heat and mass transfer [Volume 21, Issue 2, 2019, Pages 200-224]
  • Riahi, Mohammad Investigation the Failures of Journal Bearing by FMEA [Volume 21, Issue 1, 2019, Pages 30-53]

S

  • Sepahi Samian, Reza Natural convection heat transfer of nanofluid in an enclosure saturated with square and circular blocks [Volume 21, Issue 4, 2020, Pages 174-196]
  • Seyed Aghamiri, Seyede Marziyeh Design of assistive exoskeleton robot for wrist [Volume 21, Issue 1, 2019, Pages 176-187]
  • Shafiei dizaji, Ayat Heat Transfer Optimization for Straight and Helical Double Layer Micro-Channel Heat Sink [Volume 21, Issue 2, 2019, Pages 6-28]
  • Shahsavari, Hamid Study of rutting effect on the mechanical behavior of asphalt pavement under moving loads [Volume 21, Issue 3, 2019, Pages 27-52]
  • Shojaeifard, Mohammad Bending analysis of pH-sensitive hydrogels with functionally graded properties [Volume 21, Issue 1, 2019, Pages 116-131]

Y

  • Yaghoubi, Mahmood The effect of materials on energy consumption, carbon production and thermal comfort in office building in hot and humid, hot and dry and cold, Iran [Volume 21, Issue 4, 2020, Pages 33-6]
  • Yaghoubi, Somaye Optimal design and operation of a CCHP system from an economic perspective For a residential campus located in Ahvaz [Volume 21, Issue 2, 2019, Pages 114-132]
  • Yousefzadeh, Shahrooz Hydro-static effect on free vibration of circular plate in contact with bounded fluid on elastic foundation [Volume 21, Issue 1, 2019, Pages 132-150]

Z

  • Zaboli, Sohrab Heat Transfer Optimization for Straight and Helical Double Layer Micro-Channel Heat Sink [Volume 21, Issue 2, 2019, Pages 6-28]
  • Zarabadipour, Hasan Predictive Controller Design for Automobile Climate System [Volume 21, Issue 1, 2019, Pages 151-175]